Hot tubs maintained by The GENESIS Device are virtually maintenance free, and greatly reduce cost and aggravation by eliminating the purchasing, transporting, storing and handling of bromine tablets and other chemicals. This technology, while taking years to develop, is easy to understand, simple to use and amazingly effective.

The popularity of The GENESIS Device is growing rapidly and is quickly becoming the sanitation system of choice for many of the industries prime spa manufacturers.

This bromine generator system electronically creates bromine via an electrolytic process thus eliminating the need for conventional bromine tablets and the support ancillary chemicals they necessitate.

Hot tubs and spas maintained by the Genesis Device are virtually maintenance free and greatly reduce cost and aggravation by eliminating the purchasing, storing and handling of Bromine tablets.

Automating your tub is easy:

First, You fill your tub, We HIGHLY recommend using a Pre-Filter when filling, then you check your PH and Alkalinity levels, Also check your Calcium level and make sure it is between 200 & 400 ppm, This is a very important step because if the Calcium level is too high the Genesis Unit will not produce Bromine. Adjust it if needed. Then you add Tru Blu – Sodium Bromide to your tub or spa water. You only have to do this once, during the initial start-up process.
*Sodium Bromide – “NaBr” is the kissing cousin of Sodium Chloride “NaCl” (table salt)
The dissolved Sodium Bromide then circulates through your spa and makes contact with the Genesis Device. The Genesis then electronically converts Sodium Bromide into Bromine. *Bromine is the recommended sanitizer for hot tubs and spas
The Bromine sanitizes the spa’s water then reverts back to Sodium Bromide, completing the perpetual cycle.
The Genesis Device means that the days of buying tablets and filling those unsightly floating feeders are gone forever ! No more hassle…just sparkling clean water !

Additional Sodium Bromide is only added when your water level declines due to splash out, or when you drain and refill the tub.

The Genesis Device can go up to 12 months before a drain and fill is required, unlike non equipped spas that require it every 3 months. Traditional methods of sanitizing, such as Bromine pucks, have unnecessary glues, binders, and bi-products that build up in your water. The Genesis only uses 98% pure Sodium Bromide, a natural salt, which does not cause build up in your spa water.

Synthetic graphite is utilized in our revolutionary Electrode cell, providing a surface area far greater than available with metal electrodes. The Genesis Electrode is made up of 2 of these unique and powerful plates. The Electrode cell is installed in a clear PVC chamber and is then connected to the DC-out wires of the Genesis controller.

Less than 30 watts total of DC power is then digitally pulsed across the Electrode cell electronically turning Sodium Bromide into Bromine.

Imagine spa water that never requires bromine tablets, scheduled shocking, and is virtually self maintaining. The GENESIS Device has changed everything!

The Genesis Device Automatic Bromine Generator is the smartest, easiest and most cost effective way to keep your spa sparkling and always inviting.

When you purchase the Genesis Kit you will receive the Genesis Automatic Bromine Generator Unit and 12 - 2lb Bottles of Sodium Bromide. You will add 1 - 2lb bottle per 100 gallons of water, You Get enough Sodium Bromide for 1200 gallons of water or 3 refills on a 400 gallon spa and since you do not have to drain and refill the tub for up to 1 year those 12 bottles could last you 3 years. You will not have to buy Sodium Bromide for 3 YEARS.. WOW.. Now that's a big Savings over buying Bromine every 1-2 months.

Remember: We highly recommend using a Prefilter when Filling the tub with water.