LL-BAA - Brass Anchor

Brass, flush-mounted in deck with screw-type insert. 3/4" Diam. 1-5/8" Long

Available in Stainless Steel Too!

LL-XLBA - XL Brass Anchor

Extra Long Brass Anchor.
3/4" Diam. 2-3/16" Long

LL-MAC - Masonry Anchor Collar

Used to finish and decorate brass anchor insert.

Available in Stainless Steel Too!

LL-WDAF - Wood Deck Anchor W/Flange

Anchor used for wood deck installations.

LL-HK - 18in Hex Anchor Screw Key

Used for adjusting anchor insert height

LL-CGHD - Comfort Grip Hex Driver

Hex driver with cushioned screwdriver handle, used for adjusting the anchor insert.

LL-SSB - Stainless Steel Buckle

Used to attach the spring to the strap.

LL-SST - Loop Loc Metal Installation Tool

30" long steel rod, with notched end and plastic grip, used to install and remove springs from anchors.

LL-SCR - Vinyl Spring Cover - Large

UV treated- used to protect the spring & the deck

LL-SCS - Vinyl Spring Cover - Short

UV treated- used to protect the spring & the deck

LL-SSSR - Stainless Steel Spring with Cover - Large 

6 3/8", attaches to strap and anchor to supply tension to the cover.

LL-SSSS - Stainless Steel Spring with Cover - Short

4", attaches to strap and anchor in limited deck areas.

LL-WADC - Decorative Caps for Wall Anchors

¾ inch nylon threaded cap for
homeowners that prefer the cable wall anchors be removed when the
cover is off. (Wall Anchor not Included.)
Pack of 10 caps

LL-CWA - Cable Wall Anchor

Used to attach the Cable-Loc Raised Wall Barrier to the wall. Approx. 4" Total length

LL-TT - Aluminum Tamp Tool

Used for installing brass anchors

LL-CPC - Coping Protector Cover

Used to prevent marring on aluminum and bull nose coping.

LL-AP - 15" Aluminum Pipe w/Anchor

For Anchor-in-Pipe installations in Pavers, Bricks, Stone or Grass.
1" Outside Diameter Pipe.
Includes Brass Anchor.

Also Available in 9" and 18"

LL-APT - Anchor Puller Tool

Used to remove anchor casing from the deck.

LL-DSK - Dive Stand Kit

Used to avoid a strap interfering with a dive stand

LL-AGIT - A/G Installation Tool

For Installing the Springs on the Anchors for Above Ground Pool Covers

Loop Loc Patch Tape Kit

For Mesh Green covers, all years

LL-MESHPATCHKIT

Self adhesive, no tools required, patch size 4" x 8", 3 per pack.

 Loop Loc Patch Tape Kit

Green Ultra-Loc Solid - for most Solid covers built 2010 and after

LL-ULTRALOCPATCHKIT

Self adhesive, no tools required, patch size 4" x 8", 3 per pack.

LL-OGB - 2 Piece On Ground Bracket

2 Piece On Ground Cover Bracket for A/G Metal or Wood Decks

LL-Padding-BK - Black Vinyl Under Cover Padding

Black 30" x 22', used for added protection on sharp edges and corners. Can be trimmed on site.

Now Includes 6 Clip-Loc Clips for securing your padding to the cover.

See Below For More Details