Realize that most damage that occurs to hot tub spas is caused by improper winterization. When it comes time to open up your spa for use, this is when these problems will become evident. While it is strongly recommended to have a pool or spa professional close your spa, many homeowners do successfully tackle the job of spa opening themselves. It is much less risky! These instructions assume that your spa has been closed either professionally, or by you - following the proper winterization procedure.

Hot Tub Spa Opening Instructions - First, remove the winter spa cover (or tarp) that is covering your hard thermal spa cover. Remove the air pillow (if any) and deflate it. For inground spas, remove and drain any water tubes as well. Clean and fold and store away. If you do not store your winter cover indoors, and you keep it outside or in a shed, then you do not have to worry about getting the cover particularly spotlessly clean. If you do keep it in the garage or basement, you may want to clean it to a greater extent.

Remove the hard thermal cover. Then take a look inside the spa. Does everything seem OK? Some water or dirt can be expected. Hopefully, it is not half full of water. If it is, then put your submersible spa draining pump into the tub and pump out all the remaining water. Inspect the shell for cracks or splits. If there was water in the tub over the winter - and it froze - there is a chance that it could have caused serious damage to the spa shell. If you do notice any cracks or splits in the spa shell, we suggest contacting a local spa professional to check it out for you before you go any further. Remove any rubber plugs that may have been installed in...

Other Popular Articles You May Like

Hot Tub Equipment Pack Troubleshooting

How To Open An Inground Swimming Pool

Enter The New 2020 Dream Hot Tub Giveaway Contest

See More Of This Month's DIY Articles & News

Spring Savings Coupons And Shopping Options