pH Reducer, Blue Wave
It is important to keep your pool water in balance to get the most effective use of your chemicals. Test daily to ensure that pH, total alkalinity, calcium hardness and cyanuric acid (stabilizer) are within the correct levels.
pH is the most important factor in controlling you pool water balance. High pH results in cloudy water, staining, scale, and filtration problems. Low pH leads to corrosion of metal pipes, etched plaster, rapid loss of chlorine, and irritation to swimmers.
Alkalinity levels must be kept in check in order to control your pH levels. It is impossible to keep pH in the proper range if alkalinity is not within the desired range. Also, when total alkalinity drops below 80 ppm, equipment corrosion, plaster, etching and eye irritation can occur.
Calcium hardness is an integral component of water chemistry. Soft fill water can cause low hardness levels, which leads to the corrosion of pool surfaces and fixtures.
Stabilizer (cyanuric acid) shields the chlorine in your pool water from destruction from sunlight. Add to your pool water each spring to help reduce chlorine usage throughout the season.
pH REDUCER- THE SAFER ALTERNATIVE TO MURIATIC ACID!
- Lowers pH to ideal range of 7.2 to 7.6 ppm
- Stops eye irritation, cloudy water, and scaling caused by high pH
- Boosts chlorine’s ability to fight bacteria and algae
- Contains granular sodium bisulfate
- Recommended dosage: 6 oz. per 10,000 gallons.
|NY509 - pH Reducer 15lb pail - UPC - 672875225095 - NY509||$91.99||$44.99||