The Jandy Aqualink RS Electronic Controller Series gives you remote (indoor or outdoor) control over all your pool and spa equipment, backyard lighting, heater or any other electrical devices.

Complete system is composed of the Aqualink RS Model of your choice, the Power Center of your choice, the optional Spa Side Switch or additional Relays, the Jandy 4-Pair Cable.

Can be hooked up to new or existing pools or spas. Some basic knowledge of electricity is needed for the installation of these units - so they are good for the advanced do-it-yourselfer or you can order the components and have a local licensed electrician install it for you.

Features include: One button pool to spa switching, programmable options, control of pump and auxiliary functions, in house dual thermostat contol, heater and booster pump safety circuit, service and time-out modes for serviceperson, self diagnostics.

JC1 includes: Aqualink RS8 Pool & Spa Combination Control for 7 components with two JVA 2440 controllers, indoor controller, power center board, 1 water & 1 air sensor.

JC3 includes: Aqualink RS6 Pool & Spa Combination Control for 5 components with two JVA 2440 controllers, indoor controller, power center board, 1 water & 1 air sensor.

JC5 includes: Aqualink RS6 Pool OR Spa Control for 3 components with indoor controller, power center board, 1 water & 1 air sensor.

Options Available
JC7 Standard Power Center includes four 3 HP relays
JC9 Sub Panel Power Center includes four 3 HP relays and has optional feature that can accommodate additional breakers for any circuit and/or GFCI.
JC20 Jandy 4-Pair Conductor Cable 1000 foot coil.
JC2 Aquaswitch Pool and Spa Controller which comes with Power Center with one time clock, outdoor panel, two valve actuators which controls pump from high to low, heater from high to low and two auxiliary functions of your choice.
JC11 100 foot Spa Side Switch duplicates any four functions from the RS Panel.
JC14 Temperature Sensor for water or air temperature. (If you need both air and water, order 2)
JC13 3 HP Relay with Harness (each relay can control one piece of high voltage equipment for a maximum of 3 HP).