Before and After Photos Jedco Adhesive Tile Borders Now it's so easy to transform the appearance of any pool (above or inground) in minutes. Whether it's to cover an old faded liner or just time for an updated change, Border Lines™ instantly transforms without costly installation. Safe on all surfaces whether vinyl, fiberglass, acrylic or stainless steel. Application and future removal couldn't be easier! Simply peel off the Border Line™ backing and adhere along the inner perimeter of any pool. Simply peel off when you'd like to add a new design! The tiles are UV stabilized and chemical resistant. Each Border Lines™ kit contains 10 lineal ft. of decorative water resistant border in 5 convenient 6" x 24" or 9" x 24" sections. Border Lines™ contain 10' per each kit - please choose from the designs featured Above. Colors may vary. Please specify the quantities of each specific style when ordering.   This chart is a convenient reference for the number of kits required to border most pool sizes:

The recommended number of Borderlines™ kits required for a particular pool size should allow for
additional material that can be cut to fit exact wall perimeter. Each manufacturer’s wall length can
differ slightly even though the overall size of all may be stated as a 24’, 36', 40' etc. therefore the
recommended kits will have a small amount of additional length to allow for these variances.

Preparation: Tile borders must be applied to a clean, dry surface. Surface temperature should be at least 60° F and no
more than 100° F during application.

Begin by lowering water level 10” to 12” (borders will measure 6” with an additional 4”-6” of dry surface area for
installation). Surface must then be cleaned and free of any algae, dirt or oils. Use a good tile
and vinyl cleaner for your surface. Once clean, rinse well and thoroughly dry. Borderlines™ will adhere to your surface
under water once they have been applied and cured but it is very important for both the surface and the border itself to be
completely dry during installation.

Application: Your Borderlines™ tile border will follow the top edge of your pool as a guide for placement. We
recommend using the wall skimmer as a starting point. Begin by gently peeling off several inches of the backing material
and securing the exposed border to the surface. Adhere the border using a BORDERLINES plastic squeegee or a soft
dry cloth to apply pressure working outward toward the edge. Continue to peel material and apply exposed border using
firm pressure and overlapping strokes to ensure a good bond. Once a full section of border is applied pay particular
attention to the edges, reapplying pressure if necessary to ensure proper adhesion.

Apply additional border sections side by side in a continuous pattern around the perimeter of pool.
If you come to a wall mounted obstruction, such as a return inlet or skimmer, the border can be carefully cut using
scissors to go around the fitting. Once you have completed the application and return to the original skimmer starting
point you can cut the border and tuck behind the skimmer faceplate to end.

IMPORTANT! Take one more opportunity to go over the edges of the border applying circular pressure, particularly
where it will be submerged in water. ALLOW 24 HOURS FOR ADHESIVES TO FULLY CURE BEFORE REFILLING
YOUR POOL to its normal operational level.

6” Tile Kit

Contains: 10 lineal ft. of borders
(5) 6” x 24” tiles

DO IT YOURSELF 6" Pool Makeover Kit

Contains: 80 lineal ft. of 6” borders
An Installation Kit & How To DVD

 DESIGNER 9” tile

Contains 10 lineal ft. of 9" borders
(5) 9” x 24” tiles

 DO IT YOURSELF 9" Pool Makeover Kit

Contains: 80 lineal ft. of 9” Designer borders
An Installation Kit & How To DVD

INSTALLATION KIT

Contains plastic squeegee, seam repair adhesive

DEPTH MARKER KIT

contains (16) 6” x 6” tiles: ½, 3,4,5,6,7,8
(2) NO DIVE, (1) IN. (6) FT